Building, renovation & finishing contractor in the Eastern ProvinceWhatsApp

Marble and Granite Care, Polishing and Protection

How to keep marble and granite free of stains and scratches, when they need polishing or treatment, and which cleaners to avoid.

The short answer

Marble is porous and reacts to acids and stains, while granite is harder but still benefits from protection. Care depends on daily cleaning with neutral products, treating the surface when needed, and avoiding acids and abrasives.

Daily care

  • Wipe spills at once, especially acids such as lemon, vinegar and drinks.
  • Use a neutral cleaner made for natural stone.
  • Avoid acidic cleaners, bleach and rough sponges.
  • Use mats at entrances to reduce sand that scratches the surface.

When it needs polishing or treatment

  • Loss of shine in heavy-traffic areas.
  • Stains that have soaked in and will not clean off.
  • Widespread light scratches.
  • Chipped edges or dirty joints.

Sealing for protection

Protective sealers reduce absorption of liquids and stains and need periodic renewal depending on use. Ask which product is used and how often it should be renewed for your stone type.

Common mistakes

  • Using vinegar, lemon or acidic descalers.
  • Leaving liquids on the surface.
  • Polishing with products not suited to the stone type.
  • Neglecting joint cleaning.

Marble in the Eastern Province climate

Fine dust and sand carried in on air and shoes is what dulls marble most in entrances and corridors, because it acts like sandpaper underfoot. Frequent sweeping or dry mopping matters more than washing with lots of water. Near the coast, white salts can appear on marble that touches the ground or damp walls; that is not a polishing problem but a sign of moisture rising from below, and the source of the damp needs checking before any surface treatment.

Polishing, honing and regrinding: the difference

  • Light polishing: restores shine on a sound surface dulled by use.
  • Honing: removes a thin layer to treat scratches and acid etching, then polishes.
  • Regrinding: for raised edges between pieces or a wavy floor; bigger work that needs furniture and walls protected.
  • An inspection shows which level the floor needs; not every dull floor needs full honing.

Granite on kitchen worktops

Granite tolerates heat and scratching better than marble, which is why it is often chosen for kitchen worktops. Some types still absorb oil if unprotected. A simple test: put a few drops of water on the surface; if the stone darkens and soaks it up quickly, it is time to renew the sealer. Use a chopping board and avoid putting very hot pans straight on the stone to prevent thermal shock at edges and joints.

Ask for an inspection

Send photos of the floor or surfaces on WhatsApp and we will arrange an inspection and suggest treatment.

Related services: Tiles, Marble & Granite, Villa Finishing & Interior Works, Building Maintenance, Refurbishment & Cleaning

This service in your city: Dammam, Al Khobar, Dhahran, Qatif, Jubail, Al Ahsa (Hofuf)

Frequently asked questions

How often does marble need polishing?

There is no fixed interval; it depends on foot traffic, dust and the stone type. Entrances and corridors usually need more care than rooms. When the shine has gone along walking paths while the edges are still glossy, the surface needs treatment.

Can lemon and vinegar marks be removed from marble?

They are not stains but etching of the surface by acid, so cleaning will not remove them. They are treated by light honing and polishing in place, then the sealer is renewed.

Does a sealer make marble acid-proof?

No. A sealer reduces absorption of liquids and stains, but it does not stop acids attacking the marble surface, so wiping spills at once is still essential.

Why do white marks appear on ground-floor marble?

Usually salts carried by moisture rising from the ground or a damp wall. Polishing alone will not fix it; the source of the damp must be found and treated first.

Related guides

Get a Quote WhatsApp

WhatsAppGet a Quote