Building, renovation & finishing contractor in the Eastern ProvinceWhatsApp

Kitchen Tiling and Backsplash: What to Decide First

How to choose and install kitchen floor and backsplash tile: scratch, stain and heat resistance, and timing relative to cabinets and countertops.

The short answer

A kitchen sees grease, stains, heat and spills, so it needs low-absorption, scratch-resistant floor tile and an easy-clean backsplash with few joints. Decisions on cabinet sizes and countertops should be fixed before tiling so tiles are not cut twice.

Kitchen floor

  • Low-absorption, scratch- and stain-resistant porcelain.
  • Non-slip surface that is easy to clean.
  • Narrow joints with stain-resistant grout.
  • Waterproofing if there are rooms above or below or floor drains.

Backsplash

  • A material that tolerates heat and grease splashes such as porcelain or glass.
  • Few joints to reduce dirt build-up.
  • Mark sockets, hood and pipe positions before cutting.
  • Clean edges where the wall meets the countertop or cabinets.

The right order of work

  • Plumbing and electrical first.
  • Fix cabinet and countertop sizes, then tile the backsplash.
  • Tile the floor before or after cabinets depending on cabinet design, agreed with the carpenter.
  • Final cleaning and grouting.

Common mistakes

  • Tiling before cabinet sizes are set.
  • Choosing tile that scratches or stains easily.
  • Wide joints that hold grease.
  • Ignoring socket and pipe positions.

Outdoor and heavy-use kitchens

Many villas in the Eastern Province have an outdoor kitchen or a second kitchen for heavy cooking. These see more heat and grease and are often washed down with water, so they need a slightly textured, slip-resistant floor, waterproofing under the tile, a floor drain with falls toward it, and wall tiling to a greater height behind cooking and washing areas. Planning these details from the start is far easier than adding them after tiling.

Renovating a kitchen without removing everything

  • Sometimes only the backsplash is replaced while keeping cabinets and countertops, with surfaces protected during removal.
  • The floor can be tiled without removing cabinets if the old tile beneath is sound, allowing for the height change at appliances and the dishwasher.
  • Any damp under the sink or old leak must be fixed before tiling.
  • An inspection decides whether a partial or full renovation is better.

Coordinating appliances and heights

Before tiling, fix the positions and sizes of the fridge, dishwasher and oven, because a higher new floor may stop an appliance fitting under the worktop if it is not allowed for. Fix the gas or power point for the hob, the hood height and the sockets above the worktop so tiles are cut accurately once.

Ask for an inspection

Send the kitchen plan or photos on WhatsApp and we will arrange an inspection.

Related services: Tiles, Marble & Granite, Villa Finishing & Interior Works, Villa Renovation

This service in your city: Dammam, Al Khobar, Dhahran, Qatif, Jubail, Al Ahsa (Hofuf)

Frequently asked questions

Should I tile under the cabinets or only around them?

It depends on the cabinet design and whether you may change it later. Tiling underneath makes future changes easier but uses more tile; tiling around is cheaper but ties the floor to the current cabinet layout. Agree it with the carpenter before starting.

What is the best backsplash material behind the hob?

A heat-tolerant, easy-clean material such as porcelain or purpose-made glass, with few joints and stain-resistant grout. Avoid porous materials directly behind the hob.

Does a kitchen need waterproofing under the tile?

It is recommended where there is a floor drain, the floor is washed down with water, or there are rooms below, and especially in outdoor kitchens.

Related guides

Get a Quote WhatsApp

WhatsAppGet a Quote