The short answer
Bathrooms usually leak because the waterproofing under the tile is incomplete or untested, or because joints around the drain and pipes were not detailed. Correct waterproofing covers the floor and turns up the walls, is detailed around drains and pipes, and is flood-tested for long enough before tiling.
Why bathrooms leak
- Incomplete waterproofing, or not turned up the walls.
- Untreated joints around the drain, waste and supply pipes.
- Cracks in the shower area or floor after tiling.
- Worn grout joints letting water through.
- Poor falls leaving standing water.
The correct steps
- Clean the surface, repair cracks and set falls toward the drain.
- Detail corners, joints and areas around pipes and drains.
- Apply the right membrane in layers as specified and turn it up the walls to a suitable height.
- Flood-test for long enough and watch the ceiling below.
- Protect the membrane, then tile with a suitable adhesive.
Never skip the flood test
This test is the only proof the waterproofing works before it is buried under tiles. Fixing a leak after tiling means breaking tiles and redoing work.
Signs of failure
- Damp stains on the ceiling of the floor below the bathroom.
- Mould smell or peeling paint near the bathroom.
- Tile joints that stay dark and damp.
- Rising damp on the neighbouring wall.
Waterproofing versus damp-proofing
Damp-proofing reduces moisture rising from the ground or walls, while bathroom waterproofing withstands direct, repeated contact with water and forms a barrier beneath the tile. They serve different purposes and may be used together. In a bathroom, shower or kitchen, the system must be designed for wet surfaces and applied in integrated layers with no weak joints. Ask the contractor which system is used and why it was chosen for your bathroom.
Waterproofing and services: coordination that is not skipped
Before waterproofing, plumbing must be finished and pressure-tested, and drain and pipe positions fixed, because any later change means puncturing the membrane. After waterproofing the floor must not be drilled. So we arrange for the plumber and electrician to finish before waterproofing and record the tests with photos. This coordination prevents many faults that appear a year later.
Bathrooms above living areas
If the bathroom sits above a living room or majlis, the cost of a mistake is higher, because a leak shows in the ceiling below and spoils paint and gypsum. In these cases we recommend extra care in the waterproofing details and an extended flood test before tiling. For bathrooms next to other rooms' walls we turn the membrane up the wall to a suitable height to stop water rising in the wall.
After tiling: simple maintenance that extends life
Check joints and corner silicone each year and renew silicone when it cracks. Do not drill tile for accessories without sealing the hole, and keep the bathroom ventilated. If you see stains on the ceiling below, act early: early treatment is far simpler than replacing tiling after months of leaking.
When to re-waterproof an old bathroom
If stains keep appearing under the bathroom, tiles lift or sound hollow, a mould smell will not go, or the bathroom is old with no known waterproofing, the membrane is probably weak. The lasting fix is to remove the tile, re-waterproof and retile. Surface treatments such as refilling joints or painting the ceiling below do not treat the source and only postpone the problem.
What to get in writing before a bathroom is waterproofed
Waterproofing is buried under the tiles and you will not see it again, so agree the details in writing before work starts:
- The name and type of the waterproofing system (liquid or sheet) and the number of coats per the manufacturer's specification.
- How high the waterproofing will go up the walls, and its height in the shower area.
- How the drain, pipe outlets and corners will be treated, and whether reinforcing pieces or corner tapes are used.
- The length of the flood test, who will witness it, and photos of it before tiling.
- Who is responsible if a leak appears after handover, and how it will be checked.
Waterproofing during a renovation without stripping everything
Sometimes an owner only wants to change the tiles without touching the waterproofing. If there is no sign of damp below the bathroom and the old waterproofing is sound when checked after the tiles come off, a local repair may be enough. But once the floor is open it is hard to judge old waterproofing of unknown type, and redoing it at that stage costs little compared with breaking new tiles later. That is why we usually recommend new waterproofing with any full replacement of a bathroom floor.
Ask for an inspection
If stains appear under a bathroom or you are about to renovate one, send photos on WhatsApp and we will arrange an inspection and decide whether repair is enough or re-waterproofing is needed.
Related services: Waterproofing & Insulation, Tiles, Marble & Granite, Plumbing & Electrical
This service in your city: Dammam, Al Khobar, Dhahran, Qatif, Jubail, Al Ahsa (Hofuf)
Frequently asked questions
Does a bathroom need waterproofing before every retiling?
When the whole bathroom floor is retiled, new waterproofing with a flood test is recommended, because the old layer may be damaged or of unknown type, and fixing a leak after tiling means breaking the new tiles.
How high should bathroom waterproofing go up the walls?
It goes up the walls around the whole bathroom high enough to stop water rising into the wall, and higher in the shower area, which gets direct water. The exact height depends on the specification and the bathroom layout and should be written into the agreement before work starts.
What is a bathroom flood test?
The drain is plugged and the waterproofed floor is filled with water and left for the time the specification sets, while the ceiling below and the adjoining walls are watched. If no damp appears, the waterproofing is protected and tiling starts.
Is regrouting enough to stop a bathroom leak?
Only if the leak comes from the joints themselves and the waterproofing below is sound. If stains keep returning under the bathroom after regrouting, the problem is most likely the waterproofing or the pipes and needs inspection.